top of page
5052 H32 Aluminum
When it comes to high-performance materials that won't break the bank, look no further than our 5052 aluminum.
This popular metal is a top choice for a wide range of applications, from aerospace and automotive to robotics and beyond. Thanks to its winning combination of performance and affordability, our laser-cut 5052 aluminum is a favorite among customers who demand quality without sacrificing cost.
So whether you're working on a complex project or a budget-conscious design, our 5052 aluminum is the perfect choice for your needs.
Our laser-cut 5052 Aluminum: strong, affordable, and lightweight.
If you're looking for a material that offers exceptional all-around performance for your project, there's no better choice than 5052 aluminum. Whether you're welding, machining, or bending, our laser-cut 5052 aluminum delivers unbeatable strength and durability, making it the top choice for projects where total load is a concern.
With its unique blend of strength and lightweight properties, our 5052 aluminum is the ideal material for a wide range of applications. So if you're searching for a material that can handle even the toughest challenges, look no further than our laser-cut 5052 aluminum.
Used in a variety of applications
When it comes to high-performance materials that deliver strength and durability, 5052 aluminum is an excellent choice for a wide range of applications.
With its high relative ultimate strength and fatigue strength, our laser-cut 5052 aluminum is a top choice for projects that demand exceptional performance. It's worth noting that 5052 aluminum cannot be heated to obtain its strength characteristics; instead, it must be cold-worked.
But once it has been processed in this way, our 5052 aluminum delivers moderate-to-high strength characteristics that make it the perfect choice for your needs.
Robotics
Hinges
Fan blades
Fences
Marine applications
Heat exchangers
Signage
Panels
And so much more!
GET STARTED WITH FREE QUOTE
MM
INCHES
MATERIAL PROPERTIES
1.02mm
1.60mm
2.03mm
2.29mm
2.54mm
3.18mm
4.75mm
6.35mm
9.53mm
12.7mm
Details | - |
|---|---|
Gauge | 18 |
Thickness Tolerance Positive | .089mm |
Thickness Tolerance Negative | .089mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 1.02mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | No |
Design Considerations | - |
|---|---|
Gauge | 12 |
Thickness Tolerance Positive | .127mm |
Thickness Tolerance Negative | .127mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 2.03mm |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .089mm |
Thickness Tolerance Negative | .089mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 1.6mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 1117.6 x 762mm |
Min Hole Size | .056mm |
Min Bridge Size | .061mm |
Min Hole to Edge Size | .051mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1 |
Max Bending Flat Part Size | 1117.6 x 762mm |
Min Flange Length (After Bend) | 7.7mm |
Max Bend Length | 1117.6mm |
Die Width | 12mm |
Effective Bend Radius @ 90° | .89mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 2.43mm |
K Factor | .42 |
Bend Relief Depth | 3.0mm |
Minimum Joggle BL2BL @90 Max Flange | 8.23mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | 10-32 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 24.1 x 38.1mm |
Macx Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | .812mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .812mm |
Min Deburring Part Size | 25.4 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2 |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 584.2 x 584.2mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.45mm |
Max 4 sided box flange height (hardware | 76.2mm |
Max Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .089mm |
Thickness Tolerance Negative | .089mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 1.6mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 1117.6 x 762mm |
Min Hole Size | .056mm |
Min Bridge Size | .061mm |
Min Hole to Edge Size | .051mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1 |
Max Bending Flat Part Size | 1117.6 x 762mm |
Min Flange Length (After Bend) | 7.7mm |
Max Bend Length | 1117.6mm |
Die Width | 12mm |
Effective Bend Radius @ 90° | .89mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 2.43mm |
K Factor | .42 |
Bend Relief Depth | 3.0mm |
Minimum Joggle BL2BL @90 Max Flange | 8.23mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | 10-32 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 24.1 x 38.1mm |
Macx Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | .812mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .812mm |
Min Deburring Part Size | 25.4 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2 |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 584.2 x 584.2mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.45mm |
Max 4 sided box flange height (hardware | 76.2mm |
Max Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 11 |
Thickness Tolerance Positive | .127mm |
Thickness Tolerance Negative | .127mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 2.29mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 1117.6 x 762mm |
Min Hole Size | .813mm |
Min Bridge Size | .864mm |
Min Hole to Edge Size | .66mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Min Flange Length (After Bend) | 1117.6mm |
Max Bend Length | 8.3mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | .813mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 3.6mm |
K Factor | .37 |
Bend Relief Depth | 3.6mm |
Minimum Joggle BL2BL @90 Max Flange | 9.0mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | 1/4-28 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 1.143mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.143mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 177.8 x 177.8mm |
Min Powder Coating Part Size | 25.4 x 76.2 |
Max Powder Coating Part Size | 177.8 x 177.8mm |
Hardware Min Part Size | 25.4 x 38.1 |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.5mm |
Max 4 sided box flange height (hardware | 76.2mm |
Max Part Size | .6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 10 |
Thickness Tolerance Positive | .152mm |
Thickness Tolerance Negative | .152mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 2.54mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 6.35 x 9.5mm |
Min Hole Size | .89mm |
Min Bridge Size | .99mm |
Min Hole to Edge Size | .762mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 11.76mm |
Die Width | 16.0mm |
Effective Bend Radius @ 90° | 3.18mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 4.85mm |
K Factor | .40 |
Bend Relief Depth | 6.22mm |
Minimum Joggle BL2BL @90 Max Flange | 12.14mm |
Maximum Joggle @90 Max Flange | 95.25 |
Largest Tap | 1/4-28 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 1.27mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.27mm |
Min/Max Deburring Width | 25.4 x 609.6mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1 |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 9.35mm |
Max 4 sided box flange height (hardware | 76.2mm |
Max Part Size | 1117.6 x 762mm |
Details | - |
|---|---|
Gauge | 8 |
Thickness Tolerance Positive | .152mm |
Thickness Tolerance Negative | .152mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 3.18mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.12mm |
Min Bridge Size | 1.22mm |
Min Hole to Edge Size | .97mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1 |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 12.1mm |
Die Width | 16.0mm |
Effective Bend Radius @ 90° | 3.18mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 5.49mm |
K Factor | .44 |
Bend Relief Depth | 6.86mm |
Minimum Joggle BL2BL @90 Max Flange | 12.85mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | M10 X 1.5 |
Smallest Tap | M2 X 0.4 |
Min Part Size Countersink | 25.4 x 101.6mm |
Max Part Size Countersink | 355.6 x 1168.4mm |
Countersink Min Minor | 2.51mm |
Countersink Max Major | 10.85mm |
Countersink Min Hole Center to Material Edge | 14.02mm |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 1.6mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.6mm |
Min Deburring Part Size | 24.1 x 76.2 |
Max Deburring Part Size | 24.1 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 9.35mm |
Max 4 sided box flange height (hardware | 76.2mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .23mm |
Thickness Tolerance Negative | .23mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 4.75mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.65mm |
Min Bridge Size | 1.8mm |
Min Hole to Edge Size | 1.42mm |
Tab and Slot Tolerance | .381mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 20.27mm |
Die Width | 25.0mm |
Effective Bend Radius @ 90° | 6.35mm |
Max Bend Angle | 90° |
Bend Deduction @ 90° | 9.04mm |
K Factor | .43 |
Bend Relief Depth | 11.61mm |
Minimum Joggle BL2BL @90 Max Flange | 21.0mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | 1/2 -20 |
Smallest Tap | 4-40 |
Min Part Size Countersink | 25.4 x 101.6mm |
Max Part Size Countersink | 355.6 x 1168.4 |
Countersink Min Minor | 2.52mm |
Countersink Max Major | 13.49mm |
Countersink Min Hole Center to Material Edge | 16.66mm |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 2.39mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 2.39mm |
Min Deburring Part Size | 25.4 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 15.75mm |
Max 4 sided box flange height (hardware | 76.2mm |
Min Part Size | 12.7 x 19.05mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .686mm |
Thickness Tolerance Negative | .686mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 6.35mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 2.24mm |
Min Bridge Size | 2.41mm |
Min Hole to Edge Size | 1.91mm |
Tab and Slot Tolerance | .89mm |
Min Bend Part Size | 9.5 x 63.5 |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 35.33mm |
Die Width | 40.01mm |
Effective Bend Radius @ 90° | 6.35mm |
Max Bend Angle | 90° |
Bend Deduction @ 90° | 12.22mm |
K Factor | .33 |
Bend Relief Depth | 13.21mm |
Minimum Joggle BL2BL @90 Max Flange | 36.2mm |
Maximum Joggle @90 Max Flange | 95.25 |
Largest Tap | 1/2-20 |
Smallest Tap | 4-20 |
Min Part Size Countersink | 25.4 x 101.6 |
Max Part Size Countersink | 355.6 x 1168.4mm” |
Countersink Min Minor | 2.52mm |
Countersink Max Major | 16.66mm |
Countersink Min Hole Center to Material Edge | 19.84mm |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 1914.4 x 1168.4mm |
Tapping Min Hole to Edge | 3.18mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 3.18m |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 29.21mm |
Max 4 sided box flange height (hardware | 76.2mm |
Min Part Size | 12.7 x 19.05mm |
Details | - |
|---|---|
Thickness Tolerance Positive | .838mm |
Thickness Tolerance Negative | .838mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .126mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 9.53mm |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762 |
Min Hole Size | 3.33mm |
Min Bridge Size | 3.63mm |
Min Hole to Edge Size | 2.87mm |
Tab and Slot Tolerance | 1.6mm |
Largest Tap | 1/2-20 |
Smallest Tap | 8-32 |
Min Part Size Countersink | 25.4 x 101.6mm |
Max Part Size Countersink | 355.6 x 1168.4mm |
Countersink Min Minor | 3.3mm |
Countersink Max Major | 16.66mm |
Countersink Min Hole Center to Material Edge | 19.84mm |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 4.78mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 4.78mm |
Min Deburring Part Size | .949″ x 76.2mm |
Max Deburring Part Size | 24″ x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Min Part Size | 19.05 x 38.1mm |
Details | Text |
|---|---|
Thickness Tolerance Positive | 1.09mm |
Thickness Tolerance Negative | 1.09mm |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .127mm |
Mill Finish | Cold Rolled |
Advertised Thickness | 12.7mm |
Available Operations | Text |
|---|---|
Bending | No |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | Text |
|---|---|
Max Part Size | 1117.6 x 762 |
Min Hole Size | 4.32mm |
Min Bridge Size | 4.83mm |
Min Hole to Edge Size | 3.81mm |
Tab and Slot Tolerance | 1.27mm |
Largest Tap | 1/2-20 |
Smallest Tap | 10-32 |
Min Part Size Countersink | 25.4 x 101.6mm |
Max Part Size Countersink | 355.6 x 1168.4mm |
Countersink Min Minor | 4.9mm |
Countersink Max Major | 16.66mm |
Countersink Min Hole Center to Material Edge | |
Min Flat Part Size Tapping | 25.4 x 38.1 |
Max Flat Part Size Tapping | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 6.35mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 6.35mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Anodizing Part Size | 25.4 x 76.2mm |
Max Anodizing Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Min Part Size | 25.4 x 25.4mm |
.040″
.063″
.080"
.090″
.100″
.125″
.187″
.250″
.375″
.500″
Details | - |
|---|---|
Gauge | 18 |
Thickness Tolerance Positive | .004″ |
Thickness Tolerance Negative | .004″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .040″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | No |
Design Considerations | - |
|---|---|
Min Part Size | .25″ x .375″ |
Min Hole Size | .015″ |
Min Bridge Size | .020″ |
Min Hole to Edge Size | .020″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Min Flange Length (After Bend) | .286″ |
Max Bend Length | 44″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .024″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .062″ |
K Factor | 0.45 |
Bend Relief Depth | 0.084 |
Minimum Joggle BL2BL @90 Max Flange | .299″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware) | 3″ |
Max Part Size | 44″ x 30″ |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .004″ |
Thickness Tolerance Negative | .004″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .063″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 44″ x 30″ |
Min Hole Size | .022″ |
Min Bridge Size | .024″ |
Min Hole to Edge Size | .020″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Min Flange Length (After Bend) | .303″ |
Max Bend Length | 44″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .035″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .096″ |
K Factor | 0.42 |
Bend Relief Depth | 0.118 |
Minimum Joggle BL2BL @90 Max Flange | .324″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 10-32 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | .949″ x 1.5″ |
Macx Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .032″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .032″ |
Min Deburring Part Size | 1″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware | 3″ |
Details | - |
|---|---|
Gauge | 12 |
Thickness Tolerance Positive | .005″ |
Thickness Tolerance Negative | .005″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .080″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 44″ x 30″ |
Min Hole Size | .028″ |
Min Bridge Size | .030″ |
Min Hole to Edge Size | .024″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Min Flange Length (After Bend) | 44″ |
Max Bend Length | .313″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .050″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .115″ |
K Factor | .43 |
Bend Relief Depth | .150 |
Minimum Joggle BL2BL @90 Max Flange | .343″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/4-28 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Macx Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .040″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .040″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware | 3″ |
Max Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 11 |
Thickness Tolerance Positive | .005″ |
Thickness Tolerance Negative | .005″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .090″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 44″ x 30″ |
Min Hole Size | .032″ |
Min Bridge Size | .034″ |
Min Hole to Edge Size | .027″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Min Flange Length (After Bend) | .326″ |
Max Bend Length | 44″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .032″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .142″ |
K Factor | .37 |
Bend Relief Depth | .142 |
Minimum Joggle BL2BL @90 Max Flange | .354″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/4-28 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .045″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .045″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware | 3″ |
Max Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 10 |
Thickness Tolerance Positive | .006″ |
Thickness Tolerance Negative | .006″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .100″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | 44″ x 30″ |
Min Hole Size | .035″ |
Min Bridge Size | .038″ |
Min Hole to Edge Size | .030″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .463″ |
Die Width | .630″ |
Effective Bend Radius @ 90° | .125″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .191″ |
K Factor | .40 |
Bend Relief Depth | .245 |
Minimum Joggle BL2BL @90 Max Flange | .478″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/4-28 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .050″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .050″ |
Min/Max Deburring Width | 1″ | 24″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .368″ |
Max 4 sided box flange height (hardware | 3″ |
Max Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 8 |
Thickness Tolerance Positive | .006″ |
Thickness Tolerance Negative | .006″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .125″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Min Part Size | .25″ x .375″ |
Min Hole Size | .044″ |
Min Bridge Size | .048″ |
Min Hole to Edge Size | .038″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .476″ |
Die Width | .630″ |
Effective Bend Radius @ 90° | .125″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .216″ |
K Factor | .44 |
Bend Relief Depth | .270 |
Minimum Joggle BL2BL @90 Max Flange | .506″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M10 X 1.5 |
Smallest Tap | M2 X 0.4 |
Min Part Size Countersink | 1″ x 4″ |
Max Part Size Countersink | 14″ x 46″ |
Countersink Min Minor | .099″ |
Countersink Max Major | .427″ |
Countersink Min Hole Center to Material Edge | .552″ |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .063″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .063″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .368″ |
Max 4 sided box flange height (hardware | 3″ |
Max Part Size | 44″ x 30″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .009″ |
Thickness Tolerance Negative | .009″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .187″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .065″ |
Min Bridge Size | .071″ |
Min Hole to Edge Size | .056″ |
Tab and Slot Tolerance | .015″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .798″ |
Die Width | .984″ |
Effective Bend Radius @ 90° | .250″ |
Max Bend Angle | 90° |
Bend Deduction @ 90° | .356″ |
K Factor | .43 |
Bend Relief Depth | .457 |
Minimum Joggle BL2BL @90 Max Flange | .826″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/2 -20 |
Smallest Tap | 4-40 |
Min Part Size Countersink | 1″ x 4″ |
Max Part Size Countersink | 14″ x 46″ |
Countersink Min Minor | .099″ |
Countersink Max Major | .531″ |
Countersink Min Hole Center to Material Edge | .656″ |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .094″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .094″ |
Min Deburring Part Size | 1″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .620″ |
Max 4 sided box flange height (hardware | 3″ |
Min Part Size | .5″ x .75″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .027″ |
Thickness Tolerance Negative | .027″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005″ |
Mill Finish | Cold Rolled |
Advertised Thickness | .250″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .088″ |
Min Bridge Size | .095″ |
Min Hole to Edge Size | .075″ |
Tab and Slot Tolerance | .035″ |
Min Bend Part Size | .375″ x 2.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | 1.371″ |
Die Width | 1.575″ |
Effective Bend Radius @ 90° | .250″ |
Max Bend Angle | 90° |
Bend Deduction @ 90° | .442″ |
K Factor | .42 |
Bend Relief Depth | .520 |
Minimum Joggle BL2BL @90 Max Flange | 1.425″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/2-20 |
Smallest Tap | 4-20 |
Min Part Size Countersink | 1″ x 4″ |
Max Part Size Countersink | 14″ x 46″ |
Countersink Min Minor | .099″ |
Countersink Max Major | .656″ |
Countersink Min Hole Center to Material Edge | .781″ |
Min Flat Part Size Tapping | 1″ x 1.5 |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .125″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .125″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 1.150″ |
Max 4 sided box flange height (hardware | 3″ |
Min Part Size | .5″ x .75″ |
Details | - |
|---|---|
Thickness Tolerance Positive | .033″ |
Thickness Tolerance Negative | .033″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005 |
Mill Finish | Cold Rolled |
Advertised Thickness | .375″ |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .131″ |
Min Bridge Size | .143″ |
Min Hole to Edge Size | .113″ |
Tab and Slot Tolerance | .040″ |
Largest Tap | 1/2-20 |
Smallest Tap | 8-32 |
Min Part Size Countersink | 1″ x 4″ |
Max Part Size Countersink | 14″ x 46″ |
Countersink Min Minor | .130″ |
Countersink Max Major | .656″ |
Countersink Min Hole Center to Material Edge | .781″ |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .188″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .188″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Min Part Size | .75″ x 1″ |
Details | - |
|---|---|
Thickness Tolerance Positive | .043″ |
Thickness Tolerance Negative | .043″ |
Cutting Process | Fiber Laser |
Cut Tolerance +/- | .005 |
Mill Finish | Cold Rolled |
Advertised Thickness | .500″ |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | Yes |
Tapping | Yes |
Anodizing | Yes |
Plating | No |
Powder Coating | Yes |
Hardware | Yes |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .170″ |
Min Bridge Size | .190″ |
Min Hole to Edge Size | .150″ |
Tab and Slot Tolerance | .050″ |
Largest Tap | 1/2-20 |
Smallest Tap | 10-32 |
Min Part Size Countersink | 1″ x 4″ |
Max Part Size Countersink | 14″ x 46″ |
Countersink Min Minor | .193″ |
Countersink Max Major | .656″ |
Countersink Min Hole Center to Material Edge | .781″ |
Min Flat Part Size Tapping | 1″ x 1.5″ |
Max Flat Part Size Tapping | 36″ x 46″ |
Tapping Min Hole to Edge | .250″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .250″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Anodizing Part Size | 1″ x 3″ |
Max Anodizing Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Min Part Size | 1″ x 1″ |
Properties | Value | Properties | Value |
|---|---|---|---|
Tensile Strength (Ultimate) | 34 ksi | Elastic Modulus | 9900 ksi |
Tensile Strength (Yield) | 26 ksi | Poisson’s Ratio | 0.33 |
Shear Strength | 20 ksi | Thermal Conductivity | 80 BTU/h-ft-°F |
Shear Modulus | 3700 ksi | Melting Point | 1120 °F |
Fatigue Strength | 17 ksi | Magnetic | No |
Brinell Hardness | 60 | Material Composition | Aluminum (Al): 95.8 – 97.7 Magnesium (Mg): 2.2 – 2.8 Chromium (Cr): 0.15 – 0.35 Iron (Fe): 0 – 0.4 Silicon (Si): 0 – 0.25 Manganese (Mn): 0 – 0.1 Zinc (Zn): 0 – 0.1 Copper (Cu): 0 – 0.1 Residuals: 0 – 0.15 |
Elongation at Break | 0.12 |
Our laser cut aluminum is guaranteed
We guarantee awesome quality parts. If you’re not 100% happy, we’ll give you a refund or remake on the spot – no questions, no hassle.
Material Charts and Guidelines
To meet all of your project demands, choose from a wide range of services.
Cutting Services
We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.
Bending & Forming
Add dimension to your projects with our precision CNC bending services.
Countersinking & Tapping
Quickly and easily add threading to your parts
Hardware Insertion
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
Anodizing & Plating
Enhance your custom laser cut parts with deburring, anodizing, and plating services.
Powder Coating
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors
bottom of page