top of page
Laser Cut Mild Steel (A36/1008)
Carbon Steel in Three Finishes:​
-
Cold Rolled Carbon Steel (1008)
-
Hot Rolled Carbon Steel (A36)
-
Hot Rolled Pickled and Oiled Carbon Steel (HRP&O) (A36)
Cost effective and versatile
For fabricators, welders, machinists, prototypers, and anybody else who wants a robust, dependable part that is simple to deal with, our mild steel is the material of choice.
The Great material choice
One of the most often utilized forms of steel is mild steel since it can be used to make items in a range of industries. Mild steel can be used for a variety of things, such as fencing, signs, cars, furniture, and structural purposes. Go through the following list to learn more about the various project types for which low carbon steel can be a great material choice:
Structural steel
Furniture
Decorations
Signs
Wire
Nails
Automotive
Fencing
And so much more!
GET STARTED WITH FREE QUOTE
MM
INCHES
MATERIAL PROPERTIES
.076mm
1.22mm
1.50mm
1.88mm
2.64mm
3.02mm
3.43mm
4.75mm
6.35mm
9.5mm
12.7mm
Details | - |
|---|---|
Gauge | 22 |
Thickness Tolerance Positive | .08mm |
Thickness Tolerance Negative | .08mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .76mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | No |
Hardware | No |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 584.2 x 762mm |
Min Hole Size | .38mm |
Min Bridge Size | .38mm |
Min Hole to Edge Size | .51mm |
Min Bend Part Size | 9.5 x 38.1mm |
Tab and Slot Tolerance | 0.254 |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (Before Bend/Flat Pattern )90° or less (obtuse) | 6.48mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 7.26mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 1.14mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 1.55mm |
K Factor | 0.38 |
Bend Relief Depth | 2.41mm |
Minimum Joggle BL2BL @90 Max Flange | 7.32mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 18 |
Thickness Tolerance Positive | .127mm |
Thickness Tolerance Negative | .102mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | 1.22mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .46mm |
Min Bridge Size | .61mm |
Min Hole to Edge Size | .51mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | .9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 6.48mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 7.57mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 1.14mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 2.18mm |
K Factor | 0.38 |
Bend Relief Depth | 2.87mm |
Minimum Joggle BL2BL @90 Max Flange | 7.82mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Min Powder Coating Part Size | 25.4 x 7.62mm |
Min Plating Part Size | 25.4 x 7.62mm |
Max Plating Part Size | 584.2 x 584.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.5mm |
Max 4 sided box flange height (hardware) | 7.62mm |
Min Part Size | 6.53 x 9.5mm |
Details | - |
|---|---|
Gauge | 16 |
Thickness Tolerance Positive | .152mm |
Thickness Tolerance Negative | .152mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | 1.50mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762 |
Min Hole Size | .56mm |
Min Bridge Size | .76mm |
Min Hole to Edge Size | .51mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 6.48mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 8.0mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 1.6mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 2.84mm |
K Factor | 0.36 |
Bend Relief Depth | 3.61mm |
Minimum Joggle BL2BL @90 Max Flange | 8.13mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Largest Tap | M3 x 0.5 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | .76mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .76mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.5mm |
Max 4 sided box flange height (hardware) | 7.62mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .152mm |
Thickness Tolerance Negative | .102mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | 1.88mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .71mm |
Min Bridge Size | .81mm |
Min Hole to Edge Size | .56mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 6.48mm |
Min Flange Length (After Bend) 90° or less (obtuse) | .81mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 1.6mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 3.27mm |
K Factor | 0.4 |
Bend Relief Depth | 4.0mm |
Minimum Joggle BL2BL @90 Max Flange | 8.53mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Largest Tap | M6 x 1.0 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | .94mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .94mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.5mm |
Max 4 sided box flange height (hardware) | 76.2mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 12 |
Thickness Tolerance Positive | .178mm |
Thickness Tolerance Negative | .127mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | 2.64mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.02mm |
Min Bridge Size | .89mm |
Min Hole to Edge Size | .79mm |
Tab and Slot Tolerance | .38mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 939.8mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 9.35mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 11.66mm |
Die Width | 16.0mm |
Effective Bend Radius @ 90° | 1.6mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 4.61 |
K Factor | 8.64 |
Bend Relief Depth | 4.75mm |
Minimum Joggle BL2BL @90 Max Flange | 12.24mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Largest Tap | 1/4 – 28 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 914.4mm |
Tapping Min Hole to Edge | 1.32mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.32mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 914.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 9.35mm |
Max 4 sided box flange height (hardware) | 76.2mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 11 |
Thickness Tolerance Positive | .178mm |
Thickness Tolerance Negative | .127mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | 3.02mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.02mm |
Min Bridge Size | .89mm |
Min Hole to Edge Size | .91mm |
Tab and Slot Tolerance | .38mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 711.2mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 9.35mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 11.84mm |
Die Width | 16.0mm |
Effective Bend Radius @ 90° | 1.6mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 5.0mm |
K Factor | 0.38 |
Bend Relief Depth | 5.13mm |
Minimum Joggle BL2BL @90 Max Flange | 12.67mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Largest Tap | 5/16 – 24 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 1.52mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.52mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 9.35mm |
Max 4 sided box flange height (hardware) | 76.2mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | 10 |
Thickness Tolerance Positive | .152mm |
Thickness Tolerance Negative | .152mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | 3.43mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.3mm |
Min Bridge Size | 1.4mm |
Min Hole to Edge Size | 1.04mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 15.75mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 18.85mm |
Die Width | 24.9mm |
Effective Bend Radius @ 90° | 2.54mm |
Max Bend Angle | 110° |
Bend Deduction @ 90° | 6.18mm |
K Factor | 0.32 |
Bend Relief Depth | 6.5mm |
Minimum Joggle BL2BL @90 Max Flange | 19.53 |
Maximum Joggle @90 Max Flange | 19.25 |
Largest Tap | M10 x 1.5 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 1.73mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.73mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 15.75mm |
Max 4 sided box flange height (hardware) | 76.2mm |
Min Part Size | 6.35 x 9.5mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .203mm |
Thickness Tolerance Negative | .203mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | HRP&O (A36) |
Advertised Thickness | 4.75mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.78mm |
Min Bridge Size | 1.85mm |
Min Hole to Edge Size | 1.42mm |
Tab and Slot Tolerance | .38mm |
Min Bend Part Size | 9.5 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 558.8mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 15.75mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 19.84 |
Die Width | 24.9mm |
Effective Bend Radius @ 90° | 3.18m |
Max Bend Angle | 90° |
Bend Deduction @ 90° | 8.2mm |
K Factor | 0.36 |
Bend Relief Depth | 8.43 |
Minimum Joggle BL2BL @90 Max Flange | 21.0mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M2 X 0.4 |
Tapping Min Hole to Edge | 2.39mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 2.39mm |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 15.75mm |
Max 4 sided box flange height (hardware) | 76.2mm |
Min Part Size | 12.7 x 19.05mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .203mm |
Thickness Tolerance Negative | .203mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | HRP&O (A36) |
Advertised Thickness | 6.35mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 2.41mm |
Min Bridge Size | 3.18mm |
Min Hole to Edge Size | 1.9mm |
Tab and Slot Tolerance | .38mm |
Min Bend Part Size | 9.5 x 76.2mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 508mm |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 29.21mm |
Min Flange Length (After Bend) 90° or less (obtuse) | 34.6mm |
Die Width | 40.0mm |
Effective Bend Radius @ 90° | 3.81mm |
Max Bend Angle | 90° |
Bend Deduction @ 90° | 10.7mm |
K Factor | 0.36 |
Bend Relief Depth | 10.67mm |
Minimum Joggle BL2BL @90 Max Flange | 36.2mm |
Maximum Joggle @90 Max Flange | 19.25mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 25.4 x 76.2mm |
Max Tapping Part Size | 914.4 x 1168.4 |
Tapping Min Hole to Edge | 3.18mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 3.18mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 76.2mm |
Hardware Max Part Size | 914.4 x 1168.4 |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | 6.5mm |
Max 4 sided box flange height (hardware) | 76.2mm |
Min Part Size | 12.7 x 19.05mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | 1.02mm |
Thickness Tolerance Negative | 1.02mm |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Steel Type | Hot Rolled (A36) |
Advertised Thickness | 9.53mm |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 2.41mm |
Min Bridge Size | 3.18mm |
Min Hole to Edge Size | 2.9mm |
Tab and Slot Tolerance | 1.27mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 4.78mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 +4.78mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Min Part Size | 25.4 x 25.4mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | 1.27mm |
Thickness Tolerance Negative | 1.27mm |
Cutting Process | Fiber Laser |
Cut Tolerance | 1.27mm |
Steel Type | Hot Rolled (A36) |
Advertised Thickness | 12.7mm |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 4.83mm |
Min Bridge Size | 4.32mm |
Min Hole to Edge Size | 3.81mm |
Tab and Slot Tolerance | 1.4mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min Tapping Part Size | 25.4 x 38.1mm |
Max Tapping Part Size | 914.4 x 1168.4mm |
Tapping Min Hole to Edge | 6.35mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 6.35mm |
Min Plating Part Size | 25.4 x 76.2mm |
Max Plating Part Size | 584.2 x 584.2mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Hardware Min Part Size | 25.4 x 38.1mm |
Hardware Max Part Size | 914.4 x 1168.4mm |
Min Part Size | 25.4 x 25.4mm |
.030"
.048"
.059"
.074"
.104"
.119"
.135"
.187"
.250"
.375"
.500"
Details | - |
|---|---|
Gauge | 22 |
Thickness Tolerance Positive | .003″ |
Thickness Tolerance Negative | .003″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .030″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | No |
Hardware | No |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .015″ |
Min Bridge Size | .015″ |
Min Hole to Edge Size | .020″ |
Min Bend Part Size | .375″ x 1.5″ |
Tab and Slot Tolerance | .010″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .255″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .286″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .045″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .0610″ |
K Factor | 0.38 |
Bend Relief Depth | 0.095 |
Minimum Joggle BL2BL @90 Max Flange | .288″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Min Part Size | .25″ x .375″ |
The Classic 100% Cotton T-Shirt is everything a t-shirt should be: soft, relaxed, and comfortable.
- Soft cotton jersey
- Short sleeves
- V-neck
- Machine wash
Details | - |
|---|---|
Gauge | 18 |
Thickness Tolerance Positive | .005″ |
Thickness Tolerance Negative | .004″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .048″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .018″ |
Min Bridge Size | .024″ |
Min Hole to Edge Size | .020″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .255″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .298″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .045″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .0860″ |
K Factor | 0.38 |
Bend Relief Depth | 0.113 |
Minimum Joggle BL2BL @90 Max Flange | .308″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Min Powder Coating Part Size | 1″ x 3″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 16 |
Thickness Tolerance Positive | .006″ |
Thickness Tolerance Negative | .004″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .059″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .022″ |
Min Bridge Size | .030″ |
Min Hole to Edge Size | .020″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .255″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .311″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .063″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1120″ |
K Factor | 0.36 |
Bend Relief Depth | 0.142 |
Minimum Joggle BL2BL @90 Max Flange | .320″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M3 x 0.5 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .030″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .030″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .006″ |
Thickness Tolerance Negative | .004″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .074″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .028″ |
Min Bridge Size | .032″ |
Min Hole to Edge Size | .022″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .255″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .320″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .063″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1290″ |
K Factor | 0.4 |
Bend Relief Depth | 0.157 |
Minimum Joggle BL2BL @90 Max Flange | .336″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M6 x 1.0 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .037″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .037″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 12 |
Thickness Tolerance Positive | .007″ |
Thickness Tolerance Negative | .005″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .104″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .040″ |
Min Bridge Size | .035″ |
Min Hole to Edge Size | .031″ |
Tab and Slot Tolerance | .015″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 37″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .368″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .459″ |
Die Width | .630″ |
Effective Bend Radius @ 90° | .063″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1815″ |
K Factor | 0.34 |
Bend Relief Depth | 0.187 |
Minimum Joggle BL2BL @90 Max Flange | .482″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/4 – 28 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .052″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .052″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .368″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 11 |
Thickness Tolerance Positive | .007″ |
Thickness Tolerance Negative | .005″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .119″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .040″ |
Min Bridge Size | .035″ |
Min Hole to Edge Size | .036″ |
Tab and Slot Tolerance | .015″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 28″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .368″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .466″ |
Die Width | .630″ |
Effective Bend Radius @ 90° | .063″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1955″ |
K Factor | 0.38 |
Bend Relief Depth | 0.202 |
Minimum Joggle BL2BL @90 Max Flange | .499″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 5/16 – 24 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .060″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .060″ |
Min Powder Coating Part Size | 1″ x 3″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .368″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 10 |
Thickness Tolerance Positive | .006″ |
Thickness Tolerance Negative | .006″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Cold Rolled (1008) |
Advertised Thickness | .135″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .051″ |
Min Bridge Size | .055″ |
Min Hole to Edge Size | .041″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .620″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .742″ |
Die Width | .984″ |
Effective Bend Radius @ 90° | .100″ |
Max Bend Angle | 110° |
Bend Deduction @ 90° | .2440″ |
K Factor | 0.32 |
Bend Relief Depth | 0.255 |
Minimum Joggle BL2BL @90 Max Flange | .769″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M10 x 1.5 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .068″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .068″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .620″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .008″ |
Thickness Tolerance Negative | .008″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | HRP&O (A36) |
Advertised Thickness | .187″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .070″ |
Min Bridge Size | .073″ |
Min Hole to Edge Size | .056″ |
Tab and Slot Tolerance | .015″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 22″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | .620″ |
Min Flange Length (After Bend) 90° or less (obtuse) | .781″ |
Die Width | .984″ |
Effective Bend Radius @ 90° | .125″ |
Max Bend Angle | 90° |
Bend Deduction @ 90° | .3225″ |
K Factor | 0.36 |
Bend Relief Depth | 0.332 |
Minimum Joggle BL2BL @90 Max Flange | .826″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M2 X 0.4 |
Tapping Min Hole to Edge | .094″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .094″ |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .620″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .5″ x .75″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .008″ |
Thickness Tolerance Negative | .008″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | HRP&O (A36) |
Advertised Thickness | .250″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .095″ |
Min Bridge Size | .125″ |
Min Hole to Edge Size | .075″ |
Tab and Slot Tolerance | .015″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 20″ |
Min Flange Length (Before Bend/Flat Pattern) 90° or less (obtuse) | 1.150″ |
Min Flange Length (After Bend) 90° or less (obtuse) | 1.361″ |
Die Width | 1.575″ |
Effective Bend Radius @ 90° | .150″ |
Max Bend Angle | 90° |
Bend Deduction @ 90° | .4215″ |
K Factor | 0.36 |
Bend Relief Depth | 0.42 |
Minimum Joggle BL2BL @90 Max Flange | 1.425″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M2 X 0.4 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .125″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .125″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Minimum distance from center of bend to center of hardware insertion hole (measured from flat pattern) | .255″ |
Max 4 sided box flange height (hardware) | 3″ |
Min Part Size | .5″ x .75″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .040″ |
Thickness Tolerance Negative | .040″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Hot Rolled (A36) |
Advertised Thickness | .375″ |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .095″ |
Min Bridge Size | .125″ |
Min Hole to Edge Size | .113″ |
Tab and Slot Tolerance | .050″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .188″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .188″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Min Part Size | 1″ x 1″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .050″ |
Thickness Tolerance Negative | .050″ |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Steel Type | Hot Rolled (A36) |
Advertised Thickness | .500″ |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | Yes |
Powder Coating | Yes |
Hardware | Yes |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .095″ |
Min Bridge Size | .125″ |
Min Hole to Edge Size | .113″ |
Tab and Slot Tolerance | .050″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min Tapping Part Size | 1″ x 1.5″ |
Max Tapping Part Size | 36″ x 46″ |
Tapping Min Hole to Edge | .188″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .188″ |
Min Plating Part Size | 1″ x 3″ |
Max Plating Part Size | 23″ x 23″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Hardware Min Part Size | 1″ x 1.5″ |
Hardware Max Part Size | 36″ x 46″ |
Min Part Size | 1″ x 1″ |
Properties | Value | Properties | Value |
|---|---|---|---|
Density | 490 lb/ft^3 | Elastic Modulus | 27000 ksi |
Tensile Strength (Ultimate) | 54 ksi | Poisson’s Ratio | 0.29 |
Tensile Strength (Yield) | 45 ksi | Thermal Conductivity | 36 BTU/h-ft-°F |
Shear Strength | 34 ksi | Melting Point | 2600 °F |
Shear Modulus | 11000 ksi | Magnetic | Yes |
Fatigue Strength | 32 ksi | Does it Rust? | Yes |
Brinell Hardness | 100 | Material Composition | Iron (Fe): 99.31 – 99.7
Manganese (Mn): 0.3 – 0.5
Carbon (C): 0 – 0.1
Sulfur (S): 0 – 0.05
Phosphorus (P): 0 – 0.04 |
Elongation at Break | 0.22 |
Our laser cut mild steel is guaranteed
We guarantee awesome quality parts. If you’re not 100% happy, we’ll give you a refund or remake on the spot – no questions, no hassle.
Additional Charts and Guidelines
To meet all of your project demands, choose from a wide range of services.
Cutting Services
We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.
Bending & Forming
Add dimension to your projects with our precision CNC bending services.
Countersinking & Tapping
Quickly and easily add threading to your parts
Hardware Insertion
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
Anodizing & Plating
Enhance your custom laser cut parts with deburring, anodizing, and plating services.
Powder Coating
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors
bottom of page