top of page
Laser Cut Stainless Steel (304)
Our preferred metal for many projects, such as industrial robotics, ornamental applications, and automation machinery, is laser cut stainless steel (304 series). It is strong, long-lasting, and simple to use.
Stainless steel is a fantastic material choice for projects that must last the test of time.
Durable 304 Stainless Steel Laser cut for every project
Our first preference for projects requiring significant strength and longevity is 304 stainless steel, which is formable, easy to work with, and weldable.
304 stainless steel that has been laser cut is oxidation-resistant and simple to clean and maintain. The preferred grade of stainless steel for many food service uses, from countertops to cookware, is 304 due to a specific characteristic.
Used in a variety or applications
Because to the exceptional fusion welding performance of 304 stainless steel, both with and without fillers, it is a popular choice for applications that call for welding. Occasionally, additional treatments like annealing are needed for heavily welded portions, but in general, the material is straightforward to weld.
In the end, you can rely on Ascenti CNC's 304 stainless steel laser cutting services to satisfy your project's requirements and deliver sturdy parts that adhere to your standards.
Appliances
Food processing equipment
Architectural
Kitchen equipment
Screws
Utensils
Blades
Machinery parts
And so much more!
GET STARTED WITH FREE QUOTE
MM
INCHES
MATERIAL PROPERTIES
.76mm
1.22mm
1.52mm
1.88mm
2.54mm
3.18mm
4.75mm
6.35mm
9.53mm
12.7mm
Details | - |
|---|---|
Gauge | 22 |
Thickness Tolerance Positive | .051mm |
Thickness Tolerance Negative | .051mm |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 0.76mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | No |
Hardware | No |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .381mm |
Tab and Slot Tolerance | .254mm |
Min Bridge Size | .381mm |
Min Hole to Edge Size | .381mm |
Min Bend Part Size | 9.53mm x 1.5″ |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 7.47mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 2.03mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 2.0mm |
K Factor | 9.14 |
Bend Relief Depth | 3.3mm |
Minimum Joggle BL2BL @90 Max Flange | 7.32 |
Maximum Joggle @90 Max Flange | 95.25mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | 18 |
Thickness Tolerance Positive | .076mm |
Thickness Tolerance Negative | .076mm |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 1.22mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .48mm |
Min Bridge Size | .48mm |
Min Hole to Edge Size | .51mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.53mm x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 7.8mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 2.03mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 2.65mm |
K Factor | 9.14mm |
Bend Relief Depth | 3.76mm |
Minimum Joggle BL2BL @90 Max Flange | 7.82mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Min Deburring Part Size | 24.1 x 762mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 25.4 x 7.62mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | 16 |
Thickness Tolerance Positive | .076mm |
Thickness Tolerance Negative | .076mm |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 1.52mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .61mm |
Min Bridge Size | .61mm |
Min Hole to Edge Size | .51mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.53mm x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 8.0mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 1.78mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 3.0mm |
K Factor | 8.64 |
Bend Relief Depth | 3.81mm |
Minimum Joggle BL2BL @90 Max Flange | 8.15mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | M6 x 1.0 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | .76mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .76mm |
Min Deburring Part Size | .24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .152mm |
Thickness Tolerance Negative | .051mm |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 1.88mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .76mm |
Min Bridge Size | .76mm |
Min Hole to Edge Size | .56mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.53mm x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 1117.6mm |
Min Flange Length (After Bend) | 8.23mm |
Die Width | 12.0mm |
Effective Bend Radius @ 90° | 1.9mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 3.5mm |
K Factor | 9.14mm |
Bend Relief Depth | 4.3mm |
Minimum Joggle BL2BL @90 Max Flange | 8.3mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | M6 x 1.0 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | .94mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .94mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | 12 |
Thickness Tolerance Positive | .127mm |
Thickness Tolerance Negative | .102mm |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 2.54mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.02mm |
Min Bridge Size | 1.02mm |
Min Hole to Edge Size | .76mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.53 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 889mm |
Min Flange Length (After Bend) | 18.6mm |
Die Width | 25.0mm |
Effective Bend Radius @ 90° | 4.75mm |
Max Bend Angle | 130° |
Bend Deduction @ 90° | 5.66mm |
K Factor | 9.14mm |
Bend Relief Depth | 6.05mm |
Minimum Joggle BL2BL @90 Max Flange | 18.54 |
Maximum Joggle @90 Max Flange | 95.25 |
Largest Tap | 1/4 – 28 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | 1.27mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 1.27mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 1″ x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | 11 |
Thickness Tolerance Positive | .254mm |
Thickness Tolerance Negative | .254mm |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 3.18mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | .127mm |
Min Bridge Size | .127mm |
Min Hole to Edge Size | .97mm |
Tab and Slot Tolerance | .254mm |
Min Bend Part Size | 9.53 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 457.2mm |
Effective Bend Radius @ 90° | .38.1mm |
Max Bend Angle | 120° |
Min Flange Length (After Bend) | 1.88mm |
Die Width | 25.0mm |
Bend Deduction @ 90° | 6.1mm |
K Factor | 9.65mm |
Bend Relief Depth | 7.5mm |
Minimum Joggle BL2BL @90 Max Flange | 19.25mm |
Maximum Joggle @90 Max Flange | 95.25.. |
Largest Tap | M10 x 1.5 |
Smallest Tap | M2 X 0.4 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | 1.6mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .063″ |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4 |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x .9.53mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | 1.14mm |
Thickness Tolerance Negative | 1.14mm |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 4.75mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 1.9mm |
Min Bridge Size | 1.4mm |
Min Hole to Edge Size | 1.2mm |
Tab and Slot Tolerance | .127mm |
Min Bend Part Size | 9.53 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 457.2 |
Min Flange Length (After Bend) | 19.91mm |
Effective Bend Radius @ 90° | 3.3mm |
Max Bend Angle | 90° |
Die Width | 25.0mm |
Bend Deduction @ 90° | 8.34mm |
K Factor | 9.14mm |
Bend Relief Depth | 8.56mm |
Minimum Joggle BL2BL @90 Max Flange | 21.0mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M3 X 0.5 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | 2.4mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 2.4mmmm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4 |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | 1.14mm |
Thickness Tolerance Negative | 1.14mm |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 6.35mm |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 2.03mm |
Min Bridge Size | 1.9mm |
Min Hole to Edge Size | 1.6mm |
Tab and Slot Tolerance | .127mm |
Min Bend Part Size | 9.53 x 38.1mm |
Max Bending Flat Part Size | 1117.6 x 762mm |
Max Bend Length | 457.2 |
Min Flange Length (After Bend) | 35.1mm |
Die Width | 40.0mm |
Effective Bend Radius @ 90° | 5.72mm |
Max Bend Angle | 90° |
Bend Deduction @ 90° | 11.73 |
K Factor | 9.14mm |
Bend Relief Depth | 12.57mm |
Minimum Joggle BL2BL @90 Max Flange | 36.2mm |
Maximum Joggle @90 Max Flange | 95.25mm |
Largest Tap | 43832 |
Smallest Tap | M4 X 0.7 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | 3.18mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .125″ |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Max Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 6.35 x 9.53mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | 1.4mm |
Thickness Tolerance Negative | 1.4mm |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 9.53mm |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 3.81mm |
Min Bridge Size | 3.81mm |
Min Hole to Edge Size | 2.87mm |
Tab and Slot Tolerance | 1.22mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | 4.78mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 4.78mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Min Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 12.7 x 12.7mm |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | 1.4mm |
Thickness Tolerance Negative | 1.4mm |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .127mm |
Advertised Thickness | 12.7mm |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 1117.6 x 762mm |
Min Hole Size | 5.08mm |
Min Bridge Size | 5.08mm |
Min Hole to Edge Size | 3.81mm |
Tab and Slot Tolerance | 1.22mm |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min Flat Part Size Tapping | 25.4 x 38.1mm |
Max Flat Part Size Tapping | 914.4 1168.4mm |
Tapping Min Hole to Edge | 6.35mm |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + 6.35mm |
Min Deburring Part Size | 24.1 x 76.2mm |
Max Deburring Part Size | 609.6 x 1168.4mm |
Min Powder Coating Part Size | 25.4 x 76.2mm |
Min Powder Coating Part Size | 584.2 x 584.2mm |
Min Part Size | 12.7 x 12.7mm |
.030″
.048"
.060"
.074"
.100"
.125″
.187″
.250″
.375″
.500″
Details | - |
|---|---|
Gauge | 22 |
Thickness Tolerance Positive | .002″ |
Thickness Tolerance Negative | .002″ |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .030″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | No |
Hardware | No |
Deburring | No |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .015″ |
Tab and Slot Tolerance | .010″ |
Min Bridge Size | .015″ |
Min Hole to Edge Size | .015″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .294″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .080″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .0785″ |
K Factor | 0.36 |
Bend Relief Depth | .130″ |
Minimum Joggle BL2BL @90 Max Flange | .288″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 18 |
Thickness Tolerance Positive | .003″ |
Thickness Tolerance Negative | .003″ |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .048″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | No |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .019″ |
Min Bridge Size | .019″ |
Min Hole to Edge Size | .020″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .307″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .080″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1045″ |
K Factor | 0.36 |
Bend Relief Depth | .148″ |
Minimum Joggle BL2BL @90 Max Flange | .308″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 16 |
Thickness Tolerance Positive | .003″ |
Thickness Tolerance Negative | .003 ″ |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .060″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .024″ |
Min Bridge Size | .024″ |
Min Hole to Edge Size | .020″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .314″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .070″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1185″ |
K Factor | 0.34 |
Bend Relief Depth | .150″ |
Minimum Joggle BL2BL @90 Max Flange | .321″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M6 x 1.0 |
Smallest Tap | M2 X 0.4 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .030″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .030″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 14 |
Thickness Tolerance Positive | .006″ |
Thickness Tolerance Negative | .002″ |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .074″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .030″ |
Min Bridge Size | .030″ |
Min Hole to Edge Size | .022″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 44″ |
Min Flange Length (After Bend) | .324″ |
Die Width | .472″ |
Effective Bend Radius @ 90° | .075″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .1370″ |
K Factor | 0.36 |
Bend Relief Depth | .169″ |
Minimum Joggle BL2BL @90 Max Flange | .336″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M6 x 1.0 |
Smallest Tap | M2 X 0.4 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .037″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .037″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 12 |
Thickness Tolerance Positive | .005″ |
Thickness Tolerance Negative | .004″ |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .100″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .040″ |
Min Bridge Size | .040″ |
Min Hole to Edge Size | .030″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 35″ |
Min Flange Length (After Bend) | .732″ |
Die Width | .984″ |
Effective Bend Radius @ 90° | .187″ |
Max Bend Angle | 130° |
Bend Deduction @ 90° | .223″ |
K Factor | 0.36 |
Bend Relief Depth | .238″ |
Minimum Joggle BL2BL @90 Max Flange | .730″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/4 – 28 |
Smallest Tap | M2 X 0.4 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .050″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .050″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | 11 |
Thickness Tolerance Positive | .001″ |
Thickness Tolerance Negative | .010″ |
Finish | 2B |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .125″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .050″ |
Min Bridge Size | .050″ |
Min Hole to Edge Size | .038″ |
Tab and Slot Tolerance | .010″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 18″ |
Effective Bend Radius @ 90° | .150″ |
Max Bend Angle | 120° |
Min Flange Length (After Bend) | .740″ |
Die Width | .984″ |
Bend Deduction @ 90° | .2400″ |
K Factor | 0.38 |
Bend Relief Depth | .295″ |
Minimum Joggle BL2BL @90 Max Flange | .758″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | M10 x 1.5 |
Smallest Tap | M2 X 0.4 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .063″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .063″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .045″ |
Thickness Tolerance Negative | .045″ |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .187″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .075″ |
Min Bridge Size | .055″ |
Min Hole to Edge Size | .060″ |
Tab and Slot Tolerance | .050″ |
Min Bend Part Size | .375″ x 1.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 18″ |
Min Flange Length (After Bend) | .784″ |
Effective Bend Radius @ 90° | .130″ |
Max Bend Angle | 90° |
Die Width | .984″ |
Bend Deduction @ 90° | .3285″ |
K Factor | 0.36 |
Bend Relief Depth | .337″ |
Minimum Joggle BL2BL @90 Max Flange | .826″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M3 X 0.5 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .094″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .094″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .045″ |
Thickness Tolerance Negative | .045″ |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .250″ |
Available Operations | - |
|---|---|
Bending | Yes |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .080″ |
Min Bridge Size | .075″ |
Min Hole to Edge Size | .060″ |
Tab and Slot Tolerance | .050″ |
Min Bend Part Size | .375″ x 2.5″ |
Max Bending Flat Part Size | 44″ x 30″ |
Max Bend Length | 18″ |
Min Flange Length (After Bend) | 1.381″ |
Die Width | 1.575″ |
Effective Bend Radius @ 90° | .225″ |
Max Bend Angle | 90° |
Bend Deduction @ 90° | .4620″ |
K Factor | 0.36 |
Bend Relief Depth | .495″ |
Minimum Joggle BL2BL @90 Max Flange | 1.425″ |
Maximum Joggle @90 Max Flange | 3.750″ |
Largest Tap | 43832 |
Smallest Tap | M4 X 0.7 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .125″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .125″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Max Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .25″ x .375″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .055″ |
Thickness Tolerance Negative | .055″ |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .375″ |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .150″ |
Min Bridge Size | .150″ |
Min Hole to Edge Size | .113″ |
Tab and Slot Tolerance | .060″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .188″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .188″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Min Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .5″ x .5″ |
Details | - |
|---|---|
Gauge | N/A |
Thickness Tolerance Positive | .055″ |
Thickness Tolerance Negative | .055″ |
Finish | #1mill (hot rolled) |
Cutting Process | Fiber Laser |
Cut Tolerance | .005″ |
Advertised Thickness | .500″ |
Available Operations | - |
|---|---|
Bending | No |
Countersinking | No |
Tapping | Yes |
Anodizing | No |
Plating | No |
Powder Coating | Yes |
Hardware | No |
Deburring | Yes |
Design Considerations | - |
|---|---|
Max Part Size | 44″ x 30″ |
Min Hole Size | .200″ |
Min Bridge Size | .200″ |
Min Hole to Edge Size | .150″ |
Tab and Slot Tolerance | .060″ |
Largest Tap | 1/2 – 20 |
Smallest Tap | M6 X 1.0 |
Min/Max Shortest Side Tapping | 1″ | 36″ |
Min/Max Longest Side Tapping | 1.5″ | 46″ |
Tapping Min Hole to Edge | .250″ |
Tapping Min Hole Center to Material Edge | Tap hole size/2 + .250″ |
Min Deburring Part Size | .949″ x 3″ |
Max Deburring Part Size | 24″ x 46″ |
Min Powder Coating Part Size | 1″ x 3″ |
Min Powder Coating Part Size | 23″ x 23″ |
Min Part Size | .5″ x .5″ |
Properties | Value | Properties | Value |
|---|---|---|---|
Density | 490 lb/ft^3 | Elastic Modulus | 29000 ksi |
Tensile Strength (Ultimate) | 84 ksi | Poisson’s Ratio | 0.28 |
Tensile Strength (Yield) | 34 ksi | Thermal Conductivity | |
Shear Strength | 58 ksi | Melting Point | |
Shear Modulus | 11000 ksi | Magnetic | No |
Fatigue Strength | 25 ksi | Does it Rust? | Not under normal conditions |
Brinell Hardness | 170 kgf/mm^2 | Material Composition | Iron (Fe): 65 – 74
Chromium (Cr): 18 – 20
Nickel (Ni): 8.0 – 12
Manganese (Mn): 0 – 2.0
Silicon (Si): 0 – 0.75
Nitrogen (N): 0 – 0.1
Phosphorus (P): 0 – 0.045
Carbon (C): 0 – 0.030
Sulfur (S): 0 – 0.030 |
Elongation at Break | 0.43 |
Our laser cut stainless steel is guaranteed
We guarantee awesome quality parts. If you’re not 100% happy, we’ll give you a refund or remake on the spot – no questions, no hassle.
Material Charts and Guidelines
To meet all of your project demands, choose from a wide range of services.
Cutting Services
We offer custom laser cutting, waterjet cutting, and CNC routing. We’ll cut your parts with the method best suited for your material.
Bending & Forming
Add dimension to your projects with our precision CNC bending services.
Countersinking & Tapping
Quickly and easily add threading to your parts
Hardware Insertion
Select from our catalog of PEM press-fit hardware to add nuts, studs, and standoffs.
Anodizing & Plating
Enhance your custom laser cut parts with deburring, anodizing, and plating services.
Powder Coating
Give your laser cut parts a bold, long-lasting finish and protective layer in one of 7 colors
bottom of page